The main components of the VSA-1 and their purpose:
The VSA-1 consists of a housing with a vibrating flange on which up to 10 sets of round (rectangular) sieves with a diameter of 200 mm or 300 mm are mounted.
Sets of 1 to 10 sieves are secured to the flange using a clamping flange and posts, the length of which is adjustable depending on the number of sieves used. For wet processes, the top sieve and bottom sieve are equipped with a funnel and a nozzle. A sprinkler can be installed on the lid to ensure water flow over the entire surface of the top sieve. The entire sieve set is mounted on a stand to ensure free drainage of water from the bottom.
An on/off switch is included for wall mounting next to the vibration analyzer (option for wet processes).
TECHNICAL CHARACTERISTICS OF THE VIBRATION ANALYZER:
– 200 mm and 300 mm sieve diameters;
– up to 10 pcs. 500 mm high sieves in a set;
– maximum sieve size of 10 mm;
– minimum sieve hole size of 45 µm;
– overall dimensions 450 mm x 220 mm (excluding sieve set);
– installed power of each electric vibrator 100-200 W;
– speed 1500/3000 rpm at 50 Hz;
– vibration frequency 25 Hz/50 Hz (can be adjusted using an optional frequency converter);
– three-phase voltage: 220-380 V;
– weight without sieve set: 45 kg.